Table of Contents
Advertisement
Under the pressure switch on the top of the
front light is a battery indicator that lights up
when the batteries are low. Once the battery
indicator starts lighting up red, replace the
batteries as soon as possible.
The light comes with 4 pre-installed AAA alkaline batteries. Before use, remove the plastic
strip that protects the batteries.
Follows the steps below to replace the batteries.
1.
Remove the screw on the bottom of the front light
with a screwdriver.
2.
Remove the front cover by turning it
slightly and pulling it forward.
3.
Replace the alkaline batteries (1.5 V - 1500
mA) and reattach the front cover.
Only operate the lighting when the tricycle is stationary to prevent dangerous
situations and risk of crushing. Advice: use the automatic function of the
lighting.
Version 24.01
15/51
Advertisement
Table of Contents
