Van Raam VeloPlus3 User Manual page 25

Charging the Battery
For the best performance and to prolong the life of
the battery, we recommend that you charge the
battery at home at room temperature.
Use the charger only when the ambient
temperature is between 0 and 35 degrees.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Pull the handle forward.
3. Take the battery pack from the holder.
4. Take the battery pack inside. First plug the
charger into the socket. The green LED will
light up. The charger is now on standby.
5. Then insert the connector of the charger into the
charging point of the battery. The red LED will light
up. The charger is now charging.
Please note! If the battery is not connected
properly, the green LED will light up (standby
mode). If the connection is poor, unplug the plug
from the socket and clean the charger's
connector with a dry cloth.
6. Depending on the battery level, the charging
time is about 2,5 hours with a 13,6 Ah/36 V
battery.
7. Once the battery is fully charged, the green
LED will be solid. Now first remove the
charging connector of the charger from the
connector of the battery.
Version 24.01
1.
2.
3.
4.
5.
25/51