8
Relay Setting
Set the relay output setting from SC-U1.
The factory default setting is OFF for relay output.
To set the relay setting, press
Caution
Pressing
Alarm output setting
Set the alarm to be output when the measurement value exceeds a certain
value.
The following settings are available.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "6.4 Relay Setting" and " ◆ Alarm output setting".
When "Display item" P.15 is changed, the output item of the
Caution
channel of relay setting that have set the display item becomes OFF.
Set again if necessary.
.
automatically retains the measurement value.
23