Optex SE-pH-D Instruction Manual page 37

2
Use
offset adjustment and press
Use
The adjustment menu is displayed.
Select [Offset Adjustment] using
3
, and press
Enter the offset value.
4
Select a digit by
by
When a value outside the set range is entered, a short beep sounds.
Pressing
value to the factory default setting.
By pressing
During adjustment a progress bar is
displayed.
When completed, the display returns
to the measurement value display.
to select the item for
to switch pages.
.
and value
, and press
simultaneously while entering a value resets the
or , the value returns to the one before changing it.
.
Output item
Sensor channel
.
Sensor model
37