Calibration Initialization - Optex SE-pH-D Instruction Manual

Check the results after calibration is completed.
9
E4500
Press
For error display, refer to "Error code list" P.48.

Calibration initialization

Initialize calibration values and return them to their factory shipment values.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "6 Calibration" and " ◆ Initialize Calibration Value".
good
poor
or to return to the measurement display.
good:
The calibration is properly completed.
E4500 to E4802:
Calibration failed.
Try the steps again from 1.
poor:
Asymmetric potential error.
Try the steps again from 1.
35