12
Cleaning
Set the sensor cleaning setting from SC-U1.
To perform cleaning, press
・ The optional cleaning device is required to carry out cleaning.
・The cleaning process consists of cleaning activation time and post-
Caution
cleaning standby time.
・Pressing
Manual cleaning
Manually activate the cleaning device. Perform cleaning only if the cleaning
output has been set using relay output.
While cleaning the measurement value of the target sensor is retained (held).
Press
1
The sensor selection display is displayed.
Select a channel connected to
2
SE-pH-D/SE-ORP-D using
and press
By selecting [ALL], all of the connected
sensors can be selected.
The cleaning menu is displayed.
.
automatically retains the measurement value.
.
.
,
Output
item
Sensor channel
Sensor
model
45