Configuration
March 2024
compatible device and indicate when the connection is made. If the Field Communicator or
AMS Device Manager fail to connect, it indicates that no device was found. If this occurs,
refer to
Figure 3-1: 4–20 mA HART Transmitter Wiring Diagrams
A. R
B. Power supply
Figure 3-2: 1–5 Vdc HART Low Power Transmitter Wiring
A. Voltmeter
B. Power supply
3.3
Review configuration data
Note
Information and procedures in this section that make use of Field Communicator Fast
Key sequences and AMS Device Manager assume the transmitter and communication
equipment are connected, powered, and operating correctly.
42
Troubleshooting
.
≥ 250Ω
L
Reference Manual
00809-0100-4101
Emerson.com/Rosemount