Assembly - Grizzly G0962 Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Install (2) foot lever and bracket assemblies
on right front and rear stand legs with pre-in-
stalled (2) M8-1.25 x 16 button head cap
screws, 8mm flat washers, 8mm lock wash-
ers, and M8-1.25 hex nuts (see Figure 11).
x 2
Bracket Assemblies
Figure 11. Lever assemblies installed.
2. Install caster on each lever and bracket
assembly with M8-1.25 x 65 hex bolt and
M8-1.25 lock nut (see Figure 12).
Lever and
Bracket
Assembly
Figure 12. Caster installed on front right leg.
Model G0962A40 (Mfd. Since 07/22)
Foot Lever and
Caster
3. Install leg brace with pre-installed (4) M8-1.25
x 16 button head cap screws and (4) M6-1 x
12 button head cap screws (see Figure 13).
x 4
Leg Brace
Figure 13. Leg brace installed.
4. Install caster on leg brace mounting bracket
with M8-1.25 x 65 hex bolt and M8-1.25 lock
nut (see Figure 14).
Figure 14. Caster installed on leg brace.
x 4
Mounting
Bracket
-21-