Assembly - Grizzly G0938 Owner's Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Attach upper front bracket to (2) front stand
legs using (3) carriage bolts and (3) flange
nuts (see Figure 7).
Note: Front legs are marked with an "F". Do
not fully tighten nuts until directed to do so in
Step 8.
2.
Attach lower front bracket to front stand legs
using (2) carriage bolts and (2) flange nuts
(see Figure 7).
Upper
Front
Bracket
Front
Stand
Leg
(1 of 2)
Figure 7. Front brackets and stand legs
assembled.
3. Attach upper rear bracket to (2) rear stand
legs using (3) carriage bolts and (3) flange
nuts (see Figure 8).
Note: Rear legs are marked with an "R".
4.
Attach lower rear bracket to (2) rear stand
legs using (2) carriage bolts and (2) flange
nuts (see Figure 8).
-16-
5.
x 5
Lower Front
Bracket
Upper
Rear
Bracket
Rear
Stand
Leg
(1 of 2)
Figure 8. Rear brackets and stand legs
assembled.
Attach (2) upper side brackets to front and
rear leg assemblies using (6) carriage bolts
and (6) flange nuts (see Figure 9).
Upper
Side
Bracket
(1 of 2)
Figure 9. Upper side brackets and leg
assemblies assembled.
Model G0938 (Mfd. Since 03/21)
x 5
Lower Rear
Bracket
x 6