Hex Bolt M8-1.25 X 16 (Switch/Fence Brace); Lock Washers 8Mm (Switch); Hex Nuts M8-1.25 (Switch/Rails/Table); Hex Nuts M8-1.25 (Fence Rail Brace) - Grizzly G0962 Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Box 1 Contents (Figure 8)
A. Extension Wings ........................................ 2
B. Spreader/Riving Knife................................. 1
C. Dado Insert ................................................. 1
D. Table Insert ................................................. 1
E. Push Stick .................................................. 1
F. Saw Blade 10" x 40T .................................. 1
G. Miter Gauge ................................................ 1
H. Blade Guard Assembly .............................. 1
I. Miter Handle ............................................... 1
J. Star Knobs .................................................. 2
K. Combo Wrenches 13/22, 16/23mm ......1 Ea.
L. Hex Wrenches 2.5, 3, 4, 5, 6, 8mm .....1 Ea.
M. Handwheels ................................................ 2
N. Foot Lever and Bracket Assemblies ........... 2
O. Casters ....................................................... 3
P.
Motor Cover ................................................ 1
Q. Rear Access Panel ..................................... 1
R. Leg Brace w/Caster Mount ......................... 1
Box 2 Contents (Figure 8)
S. Fence Rail Brace ........................................ 1
T.
Front Fence Rail ......................................... 1
U. Rear Fence Rail ......................................... 1
V.
Fence Assembly ......................................... 1
Model G0962A40 (Mfd. Since 07/22)
C
H
Qty
Q
Figure 8. Model G0962A40 inventory.
Hardware (Page 18)
Hex Bolts M8-1.25 x 65 (Casters) ...................... 3
Lock Nuts M8-1.25 (Casters) ............................. 3
Qty
Cap Screws M10-1.5 x 25 (Ext. Wing/Table) ..... 6
Flat Washers 10mm (Ext. Wing/Table) .............. 6
Lock Washers 10mm (Ext. Wing/Table) ............ 6

Hex Bolt M8-1.25 x 16 (Switch/Fence Brace) .... 1

Lock Washers 8mm (Switch) ............................. 2

Hex Nuts M8-1.25 (Switch/Rails/Table) ........... 14

Hex Nuts M8-1.25 (Fence Rail Brace) ............... 2

Hex Bolts M8-1.25 x 30 (Front Fence/Table) ..... 8

Cap Screws M8-1.25 x 25 (Rear Fence/Table) . 8
Cap Screw M8-1.25 x 16 (Fence Rail Brace) .... 1
Button Hd Cap Screws M5-.8 x 12 (Cover) ..... 12

Flat Washer 6 x 20mm (Miter Handle) .............. 1

A
D E
I
J K
M
N
O
R
S
B
F
G
L
P
T
U
V
Qty
-17-