Table of Contents
Advertisement
3.12.3 Flywheel assembly
Insert the pick-up (13), the 2 Allen screws M5x14 (12) and tighten with the torque shown in the
figure.
Insert the stator (10), the 2 Allen screws M6x25 (11) and tighten with the torque shown in the figure.
Insert the 2 cable ties, the 2 screws M5x14 (12) and tighten with the torque shown in figure.
Position the stator and the wiring according to the image below.
M5x14:
8 Nm
Respect the orientation of the cable ties (15).
Cosmos 300 – Maintenance manual – V2
M6x25:
10 Nm
15
90
Advertisement
Table of Contents
