Table of Contents
Advertisement
Position the 2 pins of the flywheel locking tool [ACC110] in the 2 holes of the flywheel (8).
Hold the end of the flywheel locking tool and remove the M12x1,25 nut (6) with the 12x22x1 washer
(7).
Screw the flywheel extractor (ACC105) into the starter cup.
Turn the central pin of the extractor until the flywheel is removed from the crankshaft.
Check that the key (9) remains in the shaft.
Cosmos 300 – Maintenance manual – V2
86
Advertisement
Table of Contents
