Table of Contents
Advertisement
Before final assembly of the manual starter on the engine, check that the hooks are in the
closed position, otherwise they may be damaged.
Insert the 3 flange head screws M6x25 (1) with threadlocker (Loxeal 24-18/Loctite 222
recommended) into the manual starter bracket (2) and tighten with the torque shown in the
figure.
10 Nm
Insert the rope into the guide eyelet of the handle and tie a knot to prevent it from slipping out.
Pull the handle and check that the pulley rotates smoothly without blocking.
Cosmos 300 – Maintenance manual – V2
81
Advertisement
Table of Contents
