Table of Contents
Advertisement
Position the gasket (5) and the carburettor (4).
Screw the 2 M8 self-locking nuts (3) onto the stud bolts at the base of the carburettor and tighten
with the torque shown in the figure.
16 Nm
Insert the 4 Allen screws M6x30 (1) into the carburettor flange (2), tighten progressively, then
tighten with the torque shown in the figure.
10 Nm
Cosmos 300 – Maintenance manual – V2
32
Advertisement
Table of Contents
