Table of Contents
Advertisement
Add threadlocker (recommended Loxeal 55-03/Loctite 243): insert it into the propeller shaft
(30) threaded hole. Hardening time of the threadlocker: 3 hours.
Check that the propeller hub is correct for C115p (orange anodizing). Use of the C115u
propeller hub is not authorized for this model and involves a different assembly procedure.
Replace the anti-unscrewing washer (28) each time it is disassembled.
Insert the propeller hub (29), the anti-unscrewing washer (28) and the left-handed screw M8 (27).
Cosmos 300 – Maintenance manual – V2
132
Advertisement
Table of Contents
