3.9 Rubber mountings
Engine rubber mountings (C021, C021f)
Exhaust system rubber mountings (C151)
Components
Self-locking nuts M8* (M019)
to replace
Not required.
Special tools
Self-locking nuts M8: 18 Nm.
Values
*Always replace it when disassembled.
3.9.1 Rubber mountings disassembly
When locking the rubber mountings during maintenance take care not to damage them.
Remove the safety cable around the springs.
Remove the 4 bushing springs.
Cosmos 300 – Maintenance manual – V2
Time limit
150 h or 1 year
150 h or 1 year
150 h or 1 year
63