Table of Contents
Advertisement
3.13.4 Transmission maintenance
Clean components thoroughly with aluminium-specific degreasers.
Check teeth:
•
on the 2 gears,
•
on the clutch bell
•
on the propeller shaft.
Replace them if they show signs of wear or damage (as in photo).
Check the clutch bell, in particular the inner surface in contact with the friction material must not
show any scratches or different colouring due to overheating, otherwise (as in photo) it must be
replaced. For routine maintenance, follow the table.
Cosmos 300 – Maintenance manual – V2
124
Advertisement
Table of Contents
