Ac Connection Process - Ingeteam INGECON SUN 30TL M3 Installation And Operation Manual

AC connection
The AC connection must be made using single-pole wires. A total of five cables are used: three phases, neutral and
ground. The conductor material must be copper.

9.3. AC connection process

9. Connect the three phases, neutral and ground to the terminals marked L1, L2, L3, N and PE, respecting
the polarities. Insert the divider strips shown in the figure.
ACL2013IQM01_ - Installation and Operation Manual
PE
L1
L2
L3
N
Ingeteam
EN
ES
FR
IT
PT
35