Ingeteam
10.3. DC connection process
Assembly of aerial connectors
DANGER
It is essential to check the polarity of the strings and correctly assemble their aerial connectors to ensure that
the connection to the unit has the correct polarity. Ingeteam accepts no liability for any consequences resulting
from an incorrect connection.
Connection via quick connectors
To ensure the correct operation of the switch, when connecting the strings the numbering must be respected.
That is, string 1 is connected to connectors PV1+ y PV1-. Proceed in the same way for the remaining strings to be
connected.
With the switch on Off and the unit completely closed:
1.
Remove the caps on the connectors to which strings are to be connected.
2.
Mount the aerial connectors on the wires.
38
ACL2013IQM01_ - Installation and Operation Manual
DC connection