Environmental Conditions - Ingeteam INGECON SUN 30TL M3 Installation And Operation Manual

Ingeteam Preparation for installing the unit
• Keep the following minimum distances free of obstacles.
≥ 6 0 0
≥ 6 5 0
≥ 6 5 0
≥ 1 0 0 0
≥ 6 0 0

5.2. Environmental conditions

Environmental operating conditions indicated in section "2.8. Specification table" must be taken into account
when choosing the location of the unit.
It should be borne in mind that moderate condensation may occasionally occur as a consequence of temperature
variations. For this reason, apart from the unit's own protection, it is necessary to monitor these units once they
have been started up on sites where the conditions described above are not expected to be present.
In the event of condensation, never apply voltage to the unit.
18 ACL2013IQM01_ - Installation and Operation Manual