Advertisement
VI. OPERATION GUIDE
1.1 DISPLAY FUNCTIONS
Item No.
Items
1
Full View
2
Scan Mode
3
Lock Mode
4
E01 Code
14
| OPERATION GUIDE
Display
1. Display Resistance levels (Levels 1-32)
2. Display work out data "SPEED", "TIME", "DISTANCE",
"CALORIE"
3. Display Bluetooth status
On scan mode the data will show:
1. Small window for resistance level
2. SPEED, TIME, DISTANCE and CALORIE will appear on
the main window and will change in rotation.
3. Bluetooth status indicator
To lock a data you wish to view (rather then SCAN
MODE), press down on the knob display to the data you
wish to view - SPEED, TIME, DISTANCE, CALORIE.
On the small window, the resistance level is shown.
Purpose: To prevent assembly errors and damage to the
entire electronic component set caused by extremely
rare abnormal parts, an E01 detection mechanism for
the cable motor is added.
Issue: The shuttle cannot properly recognize the
motor's rotation state. Possible reasons include:
1. Check whether the motor wire rope is stuck and if
the motor resets normally after power-on.
2. Verify if the wire is loose or if the wire plug is skewed.
3. Ensure that the motor pulling force is sufficient at
the extreme position to prevent failure to reset to
1st gear normally. To verify, immediately adjust to the
middle gear after power-on to check for any recurring
errors.
4. Shuttle components may be damaged, though this is
highly improbable.
5. Cable could be damaged.
Description
Advertisement
