Advertisement
1.2 DISPLAY INSTRUCTIONS
Item No.
Items
Awaken
1
Device
Press
2
Knob
Rotate
3
Knob
1.3 DETAILED OPERATING INSTRUCTIONS
Upon powering on the knob display, the BUZZER will emit a long beep, the knob display will illuminate,
and the device will enter the READY state (as depicted in Figure 1). Additionally, after power-on, the
resistance will automatically reset to the "1" gear. If there is no operation within 1 minute, the device will
initiate an automatic reset, clearing the data.
Furthermore, in the absence of any operation for 3 minutes, the display will completely turn off,
transitioning into standby mode (as illustrated in Figure 2).
Display
1. In sleep mode, the display is off.
2. The knob will turn on either upon being pressed or
upon detecting any motion.
1. The knob display enters sleep mode after 3 minutes
of inactivity.
2. Press the knob to turn on the device from sleep
mode.
3. Press the knob to initiate the device in wake-up
mode.
4. Press the knob to switch display modes during
exercise.
5. Long-press the knob for 2 seconds to reset data and
transition to wake-up mode.
6. A buzzing sound accompanies pressing the knob.
1. Rotate the knob clockwise to increase resistance.
2. Rotate the knob anticlockwise to decrease
resistance.
3. There is a buzzing sound when the knob is rotated.
Fig 1
Description
Fig 2
OPERATION GUIDE |
15
Advertisement
