Advertisement
FIG 5
STEP 5: Assemble Saddle
A. Place the Saddle (pt.110) horizontally, as shown in FIG.5, use 2x Wrench (pt.40) to tighten the nuts on
both sides at the same time. Do not tighten the nut on one side only as this will not fully secure seat.
FIG 6
STEP 6: Assemble Peddle
Caution: Installing the pedals on the wrong side, tightening it the wrong way, or not fully tightening
before use will strip the thread on the cranks and pedals. Read instructions carefully.
A. As shown in the picture on the, install the pedals (pt.107R) with right-side crank and tighten it
clockwise.
B. Install the left pedal (pt. 107L) on the left side crack and tighten it counterclockwise.
C. Use the tool Wrench (pt.40) to fully tighten it, ensure it is threaded all the way.
110
107L
107R
ASSEMBLY INSTRUCTIONS |
11
Advertisement
