Tfinity Transporter Replacement; Identify The Tera Porter Requiring Service - Spectra Logic TFinity Library Component Replacement Manual

TFinity Transporter Replacement

This chapter describes replacing a transporter in the TFinity library.
I
DENTIFY THE
The library contains two transporters, one mounted on TeraPorter 1, and
one mounted on TeraPorter 2. When viewed from the front of the library,
TeraPorter 1 is on the left, and TeraPorter 2 is on the right. The two
TeraPorters are referred to as Robot 1 and Robot 2, respectively, in the
BlueScale
The library posts system messages when a TeraPorter experiences
problems or when it is moved into its service bay. You can also use the
Robotics status icon on the General Status screen for a general indication of
the overall status of the library's TeraPorters (robotics).
If system messages or the Robotics status icon on the General Status screen
indicate that a TeraPorter may have a problem, use the following steps to
view information about the current status of each TeraPorter.
1. Log into the library as a user with superuser or administrator
2. From the toolbar menu, select General > General Status to display the
T P
ERA ORTER
®
user interface.
Note: When a TeraPorter is in its service bay, the LED light bar along
the top of the service frame is illuminated red indicating the
position of the TeraPorter.
privileges.
library's General Status screen.
Figure 3 The General Status screen.
R S
EQUIRING ERVICE
8