Disengage The Service Bay Safety Door - Spectra Logic TFinity Library Component Replacement Manual

TFinity Transporter Replacement
3. Click Robotics to display the Robotics Status screen and select the
4. Click Begin Service next to the robot you need to move into its service
5. Look through the window on the end of the service frame to confirm
6. Click OK on the confirmation screen. The library disengages the
Close the service bay safety door, as described in
Important
on page
7. Skip to

Disengage the Service Bay Safety Door

If the library automatically moved the TeraPorter into the service bay, use
the following steps to disengage the service bay safety door so that it can
be closed.
1. If you have not already done so, log into the library as a user with
2. From the toolbar menu, select General > General Status to display the
3. Click Robotics to display the Robotics Status screen and select the
November 2018
Robots tab (see Figure 3 on page
bay in preparation for the service operation. A status message is
displayed when the TeraPorter is successfully moved to the service bay
(see Figure 4 on page
that the TeraPorter is in the service bay.
Note: If the TeraPorter is not in the service bay, contact Spectra Logic
Technical Support for assistance (see
on page 2).
solenoid lock on the service bay safety door so that it can be closed.
Directions to close and lock the service bay safety door display.
11, prior to clicking
Close the Service Bay Safety Door on page
superuser or administrator privileges.
library's General Status screen (see
Service Frames tab.
Figure 5 The Robotics Status screen.
Transporter Replacement—Spectra TFinity Library
Prepare to Replace the Transporter
8).
9).
Close the Service Bay Safety Door
OK
.
Figure 3 on page
Contacting Spectra Logic
11.
8).
10