Games - Strong SRT 8115 User Manual

WARnIng!
Use pq to select Load Factory Settings in the Tools menu and press ok. You are asked to input your
PIN code.
Input the correct PIN code using the 0~9 (dEfAulT PIn: 1234). A confirmation window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 S/W upgrade by oTA
This receiver is equipped with an Over The Air 'OTA' software upgrade function. An Over The Air
update might not be available in your region. Please visit our website www.strong.tv or contact your
local service hotline for more information about this option.
7.4.4 upgrade by uSb
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.strong.tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and connect the device to the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press ok to proceed.
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the file containing the latest and correct software.
Once all settings are made, move the highlight to Start and press ok to start the upgrade process.
After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade
or No to quit without upgrading.
noTE:
WARnIng!

7.5 games

Your receiver is equipped with two games which can be played on your TV screen using the receiver
remote control.
Use pq to select Game from the Main menu and press ok or u to proceed.
Select one of the available games (Othello or Sudoku) using pq and press ok to start the game.
Follow the directions on screen. Press EXIT to quit a game.
16
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
If, after a software upgrade, the receiver should behave in an unexpected
way, please perform a factory reset as well. See chapter 7.4.2.
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
PART 1 • English