Connecting The Exhaust.32 - Kodak X-OMAT M6B Installation Instructions Manual

Connecting the Exhaust
[1] Connect 7.6 cm (3 in.) ELBOWS and rigid DUCT or fiexibie EXHAUST HOSE between the processor
EXHAUST PORT and the BUILDING EXHAUST DUCT.
NOTE
Do not make a solid connection at the BUILDING END. Do not connect the EXHAUST DUCT to
the processor at this time.
[2] Measure the static pressure in the DUCT using a modified J TUBE (CHECK TUBE 592380) and AIR
METER TL-2431. Make the measurement 30.5 cm (12 in.) from the end of the DUCT to be connected
to the processor.
Figure 33 Measuring the Static Pressure
32 246626