Kodak X-OMAT M6B Installation Instructions Manual page 18

Installing the Feed Shelf
[1]
Install the FEED SHELF using the 5 SCREWS, 5 WASHERS, and 5 LOCK WASHERS.
NOTE
Do not tighten the SCREWS.
Figure 13 Installing the Feed Shelf
[2] Instaii the FILM GUIDE onto the FEED SHELF using the 3 WING NUTS and 3 WASHERS.
NOTE
Do not tighten the WING NUTS.
[3] Plug the AUXILIARY/RUN SWITCH CONNECTOR into the RECEPTACLE.
18 246626