Kodak X-OMAT M6B Installation Instructions Manual page 19

Installing the Grommets and Replenisher Tubes
NOTE
For alternate installation of the
REPLENISHER TUBES, insert them
through the HOLES in the bottom of
the processor, see Figures 14 and 15,
or see the Site Specifications.
[1]
Install the 2 GROMMETS. Remove a section
of the GROMMET if necessary.
[2]
Install the REPLENISHER TUBES through the
GROMMETS.
FRAME
BO^OM RECEIVING
Figure 15 Installing the Replenisher Tubes
Through the Processor Slots
21 mm (0.81 In.) DIAMETER
2 HOLES WITH CAPS. ALTERNATE
INLETS FOR REPLENISHER TUBING.
H048_0006CA
Figure 14 Alternate Method for
Installing Replenisher Tubes
246626 19