Kodak X-OMAT M6B Installation Instructions Manual page 36

Selecting the Replenishment Mode
[1]
To access SWITCH U20 on the 100 CIRCUIT BOARD, open the ELECTRICAL BOX DOOR.
[2]
If the customer requires FLOODED REPLENISHMENT, set the SWITCH U20-1 to the right (ON).
[3] If the customer requires no WATER CONSERVATION, set the SWITCH U20-2 to the left (OFF).
[4]
U20-3 must be set to the right (ON) position.
[5] U20-4 must be set to the left (OFF) position.
Figure 36 Setting Switch U20 on the 100 Circuit Board
36 246626