Kodak X-OMAT M6B Installation Instructions Manual page 45

Adjusting the Tension of the Dryer Beit
WARNING
Parts are moving within the processor. Keep hands and ioose ciothing out of the processor.
[1]
With the processor operating, the DRYER TEMPERATURE CONTROL rotated to the fuii
counter-ciockwise position, and the dryer cooi, adjust the tension of the DRYER BELT as foiiows:
[2] Loosen the LOCKING SCREW.
[3] Rotate the ADJUSTING SCREW KNOB to tighten the BELT untii the ROLLERS just begin to rotate.
[4] Rotate the ADJUSTING SCREW KNOB an additional 1 rotation.
[5] Tighten the LOCKING SCREW.
[6] Tighten the ADJUSTING SCREW LOCK NUT.
H048_0093BCA
H048_0093BA
Figure 44 Locating the Dryer Beit and Adjuster
246626 45