Kodak X-OMAT M6B Installation Instructions Manual page 38

[3] Fill the FIXER TANK to the FIXER FILL LINE. See the figure.
NON-DRIVE
SIDE
Figure 38 Tank Fill Lines
[4] Clean any FIXER spills.
[5] Clean the SPLASH GUARD.
[6] Install the SPLASH GUARD to allow filling of the DEVELOPER TANK.
[7] Fill the DEVELOPER TANK to the DEVELOPER FILL LINE.
[8] Open the WATER SUPPLY VALVE to provide water to the processor. (The tank will not fill until the
processor is energized in a later step.)
38
246626