Table of Contents
Advertisement
Panasonic Eco Solutions Nordic AB
MEW01777
26.5
Action
"
"
Menu
Scroll to menu H4.
↲
"
"
Scroll to menu U5.
↲
"
"
"
"
ESC
Rev: -
Operating Instructions Fire alarm system EBL512 G3, V2.2.x
Sensors activating SERVICE signal (H4/U5)
When SERVICE signal is generated in the system, following symbol
is shown in the display's symbol area:
Regarding the SERVICE signal levels, see Planning Instructions,
chapter "SERVICE signal". Menu H4/U5 is a list of the sensor(s)
having activated SERVICE signal.
NOTE! SERVICE signal is only information that the sensor has to be
replaced with a new/clean sensor soon. Service signal from an Analog
multi detector with CO (4402) can also indicate that the CO sensor's
life time (5 years) is reached and the detector has to be replaced.
Service signal from an Aspirating smoke detector Aspect Nitro,
Grizzle or Lazeer: Contact service personnel.
After replacement of a detector, the SERVICE signal has to be
acknowledged for that detector, see chapter "Acknowledge SERVICE
signal (H8/S2)", page 139.
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
U5 Sensors activating SERVICE signal
Sensor, Zone ZZZ address AA needs service
technical number xxxxxx
2014-01-10 09:09:15
Sensor, Zone ZZZ address AA needs service
technical number xxxxxx
2014-04-03 19:09:35
Number of sensors: 2
Print
U5 Sensors activating SERVICE signal
NOTE! During printing "
" will be replaced with "
Print
115
Comments
According to chapter
"Access", see page 88.
If there are no sensors,
--List is empty-- will be
shown. It is a list in
which you can scroll
with "▼" or "▲".
If printer is mounted the
soft key "
" will be
Print
visible, else not. Press
"
Print
" for a print-out of
all items in the list.
Scroll to another menu or
press "
".
ESC
".
Abort printing
Advertisement
Table of Contents
