Brackets; Bracket Holders - probst SVZ-UNI-VARIO Operating Instructions Manual

Maintenance and care
Fig. 1

7.1.1 BRACKETS

1
3

7.1.2 BRACKET HOLDERS

2
1
54000041
1)
Check brackets (1) for mobility, abrasion.
Clean tooth and brackets and check for abrasion.
2
Renew worn or bent brackets.
Worn (no longer sharp-edged) or bent brackets must
be replaced!
•
4
•
•
•
Check bracket holder (1) and socket pin (2) for damage
and deformation.
Exchange damaged or bent parts.
3
•
•
2
•
26 / 33
Fig. 2
Remove hexagon nut (2) including screws.
Check position of distance bush (3) beachten.
Tighten hexagon nut (4) including screws.
Brackets must be mobile.
Loosen possibly tightened hexagon nuts and
screws (2)
Remove the locking pin from the socket pin (2),
then pull out the socket pin (2).
Remove the hexagon nut (3) inclusive the screws.
Exchange the bracket holder (1) and install the new
bracket holder in reverse order. Grease socket pin
(2).
Fig. 3
GB