www.ti.com
1 Top View with Basic External Connections
Figure 1-1
shows the top view of the EVM along with basic connections. By default, EVM is configured to
power-up through VBAT supply via onboard 12 V VIN to 3.3 V VOUT preregulator. EVM can also be powered
through external 3.3 V supply or through USB port. Please refer to
each power supply input.
Figure 1-1. EVM Board Top View with Basic Connections and Default Jumpers
SNVU851 – NOVEMBER 2023
Submit Document Feedback
Copyright © 2023 Texas Instruments Incorporated
Top View with Basic External Connections
Table 3-2
for the right jumper configuration for
LP87725Q1EVM Evaluation Module
3