Awoco RH-IT-R Owner's Manual page 3

Important Safety Instructions
Installation Preparations
Venting Requirements
Venting System Setup
Electrical Requirement
Mounting Height Recommendations
Identify the Vent In and Out Openings on the Blower Unit
Installation
Installing the Hood Unit
Installing the Blower Unit
Electrical Connection
Installing the Baffle Filters
Completing the Installation
Range Hood Use
Range Hood Control Panel
Range Hood Care
Clean the Exterior Surfaces
Clean or Replace the Baffle Filters
Replace the LED Lamps
Range Hood Troubleshooting
Warranty
Important
This Diagram is for connecting the wires from RH-IT Hood Unit to an Awoco Interior Blower Unit (Model: RH-SP##-BLW) ONLY.
•
• If you have a Blower Unit from other Brands:
• DO NOT CONNECT the wires as shown in this Wiring Diagram. Any damage from false wiring is not covered by the warranty.
• Refer to your Blower Unit's USER MANUAL for how to properly connect the wires.
Wire Colors and Speeds
Speed Control Cord
(5-Wire Cable)
(Provide Power to the Blower Unit)
Match the wire colors
Power Cord
(120V)
Hood Unit
Blower Unit
(Model: RH-SP##-BLW)
Speed Control Cord
Speed
Wire Color
Black Neutral
White White Speed Quiet (Q)
Orange
Speed Low (L)
Green
Speed Medium (M)
Red
Speed High (H)
4
5
5
5
6
6
6
7
7
8
8
8
8
9
9
10
10
10
10
11
13
3