LifeSpan Delta 3.0 User Manual page 15

2. KEY FUNCTION
1. "PROG." Key: Program selection key. The selection order is: Manual Mode, P01-P20, U01-U03, FAT Loop
2. "MODE" button:
2.1 In standby state, it is the reverse counting mode selection key. The selection order is: Manual mode, Distance
countdown, Time countdown and Calorie countdown.
2.2 Under the FAT measuring mode, the selection keys are FAT measuring parameters: the selection order is
"Gender", "Age", "Height" and "Weight ".
3. "START" button: Press this button to start the treadmill. After the countdown from 3, it will begin at a slow pace.
4. "STOP" button: Press this button during a workout, and the treadmill will gradually decelerate until it comes to a
stop. It then enters a pause state. Press the button again to resume to the standby state.
5. SPEED +/-: Adjusts the speed. The speed can be adjusted while in motion and can also be used to modify
parameters when the treadmill is stationary.
6. SPEED (3, 6, 9, 12): Quick SPEED adjustment key.
7.INCLINE +/-: Adjusts the incline levels. The number of elevation segments can be adjusted while in motion and
can also be used to modify parameters when the treadmill.
8.INCLINE (3, 6, 9, 12): Incline shortcut adjustment key.
9. Knob Display Function: Start/Pause/Stop key.
9.1 When in standby, a short press initiates the start. Within 3 seconds after the short press, the treadmill will
begin running from the lowest speed or the default speed programmed.
9.2 During a run, a brief press of the display button will show "PAU" for pause, and all data remains unchanged.
9.3 While pausing, a short press resumes movement. All counts restart from the data before pausing, and the
speed starts from the lowest speed with a gradual incline return to 0.
9.4 During running or on pause, a long press stops the treadmill, gradually slowing it down, and resumes to
standby after stopping. All data is cleared.
9.5 While running, the rotation allows for speed adjustment.
• When any key is pressed, a prompt tone will accompany it. If during the parameter adjustment of the key exceeds
the limit, a long tone prompt will be heard. No prompt tone will be produced when a key is pressed ineffectively.
3. MAIN FUNCTIONS
Turn on the power, all windows light up for 2 seconds, and then enter the standby state.
1. Quick Start (Manual Mode):
• Secure the safety lock, press the start button, and after a 3-second countdown, the treadmill initiates from the
lowest speed.
• While running, use the SPEED adjustment keys to modify the speed and the INCLINE keys to adjust the elevation
segments.
• To stop running, either press the stop button or directly disengage the safety lock.
2. Countdown Mode:
• Press the "MODE" button to cycle through time countdown, distance countdown, and calorie countdown.
• The respective window displays the default value and flashes. Use the "SPEED +/-" (INCLINE +/-) keys to adjust to
the desired value.
• Press the START key, and after a 3-second countdown, the treadmill starts from the lowest speed. Adjust speed
with the SPEED keys and elevation with the INCLINE keys.
• When the window value reaches 0, the treadmill gradually slows down to a stop. Alternatively, press the "STOP"
key or disconnect the safety lock to stop the treadmill.
OPERATION GUIDE | 15