Warranty Information DT-3/DT-5/DT-7 Treadmill Desks valid in the U.S. and Canada only. DT-3 DT-5 DT-7 Frame: Lifetime Lifetime Parts: 2 Year Replacement 2 Years 2 Years Labor: 1 Year 1 Year LifeSpan LifeSpan (32 km) LifeSpan LifeSpan LifeSpan (U.S. and Canada only)
Page 7
DT-5 Treadmill Desk Assembly - (DT-5) (preinstalled on D) Included in Hardware Bag...
Page 9
DT-5 Treadmill Desk Note: If desktop tilts up and down slightly, re-tighten the four bolts / nuts inserted in Step 2C.
Page 10
- DT-3/DT-5/DT-7 Plug the console connector from the treadmill to the desktop, see illustration below. E. Install the safety key into the front of the console. For DT-7 For DT-5 DT-3 Console...
Page 11
DT-5 Treadmill Desk Desk Leveling The treadmill desk needs to be leveled prior to use. The desk comes with 2 adjustable feet that can be used to level the desk and elimate rocking. If the desk is rocking on two of the feet, adjust the two front feet until all four feet are sitting securely on...
Page 12
Assembly - DT-7 Treadmill Base M8 Washer M8 Acorn Nut Upright Assembly Desktop Left Base Foot Right Base Foot M4 Screw M8 * 45L Accessory Tray Left Upright Right Upright Upright Positioning Bumper Treadmill Positioning Bumpers Mounting Desktop Brackets Included in Hardware Bag...
Page 13
DT-7 Treadmill Desk Step 1: Upright Support Assembly Position the left base foot (6) so the treadmill position bumper (C) is facing inward. B. With the workplace solutions logo facing towards you, slide the left upright support post over the bolts installed in the left base foot. (Nuts and washers pre-installed in base feet) C.
Page 14
Step 3: Desktop Assembly Note: It is a good idea to use two people for this part of the assembly in order to be sure wires are properly routed and do not get pinched while installing desktop. A. Remove the Bolts (9), Washers (10) and Nuts (11) pre-installed in the upright assembly posts.
Page 15
DT-7 Treadmill Desk Step 4: Height Adjustment/Console Harness Connections Continued C. Attach the round connector (15) (placed in the center tray during desktop assembly) to the height controller port (16). D. Connect the 7-pin rectangular connectors (14) (one is placed in the center tray during desktop assembly and the other is pre-installed at the factory).
Page 16
Start/ON - If the console is in sleep mode press and hold this button for 3 seconds to turn the console on. Once the console is turned on press to start the treadmill. E. Bluetooth - Press to turn on bluetooth to pair with personal computer. Note: Not all personal computers have a bluetooth module.
Page 17
Bluetooth - The DT series consoles include a bluetooth module to support LifeSpan apps, which can be downloaded from the LifeSpan Fitness Club. Charging Port (DT-3 ONLY) - Used for charging your wireless mobile devices.
Page 18
Problem: Console not connecting to personal computer via Bluetooth. Solution: Log into your LifeSpan Fitness Club account. Go to the Frequently Asked Questions link located at the bottom of your home page. If further assistance is needed please email coordinator@LifeSpanFitness.com.
Page 19
DT-3 / DT-5 / DT-7 Treadmill Desk (miles) (kilometers) reinstall the safty key. Warning - The audible alert is turned on from the manufacturer to warn the user that at the sole discretion of the user. F017...
Page 24
Warranty Information Grounding and Power Requirements...
Page 25
TR800DT/TR1200DT/TR5000DT Treadmill Desk TR800DT US and Canada Warranty Only Mechanics and Performance Usage (3 hrs/day) 0.4 - 4.0 mph (0.6 - 6.5 kph) Treadmill Frame Lifetime Speed Range 18” x 52 “ (45.7 cm x 132 cm) Motor 3 Years Running Belt Size 2.0 ”...
Page 26
Lifetime Lifetime Lifetime Motor: 3 Years 3 Years 3 Years Parts: 1 Year 2 Years 2 Years Labor: 1 Year 1 Year 1 Year LifeSpan LifeSpan 20 miles (32 km) is required. LifeSpan LifeSpan LifeSpan click on product registration LifeSpan...
Page 27
TR800DT/TR1200DT/TR5000DT Treadmill Desk (0.61 m) (1.2 m) LifeSpan (3 m)
Grounding and Power Requirements LifeSpan Fitness equipment must be grounded. Improper connection of the equipment’s grounding electric if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product or use a ground plug adaptor to adapt to a non-grounded outlet. If the plug will electrician.
Page 30
- If purchased with the DT-5 or DT-7 Desktop console DT-3 Console Treadmill to Tethered Console (DT-3) shown and tighten the thumb screws.
Page 31
TR800DT/TR1200DT/TR5000DT Treadmill Desk The readmill needs to be leveled prior to beginning use.
Page 32
The walking belt should be lubricated every three months, even if the treadmill is not being used, silicone will dissipate over time and the belt will dry out. hand...
Page 33
TR800DT/TR1200DT/TR5000DT Treadmill Desk Note: For Engineering Mode information see the owner’s manual for the DT-3/DT-5 mode.
Need help?
Do you have a question about the DT-3 and is the answer not in the manual?
Questions and answers