LifeSpan Delta 3.0 User Manual page 8

V. ASSEMBLY INSTRUCTIONS
STEP 1
1. Open the package and remove the contents. Lay the machine on flat ground and check all parts are
there.
4
68
8 | ASSEMBLY HARDWARE
82
STEP 2
1. Use a 6# hexagon wrench (14) to secure
the hexagon flat round head screw (68) and
the internal serrated locking washer (82)
through the base (2) and the right column
group (3), and lightly tighten it on the base
(2).
3
2. Lock the base (2) and the right column
group (3) together using the hexagon flat
67
head screw (67) and the internal serrated
86
locking washer (86), employing a 5#
2
hexagon wrench (13). This is illustrated in
the left view.
82
68
3. The assembly method on the left is
identical to that on the right.
Note: During the tightening process, always
grasp the upright post to prevent it from
falling and causing damage.