LifeSpan Delta 3.0 User Manual page 21

LUBRICATING THE TREADMILL
Place the treadmill on level ground and set it at 6-8kph to check if the Running Belt drifts.
IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use.
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the running board and running belt is essential as the friction between the two affects the
life span and function of the treadmill, therefore it is suggested that the running board and belt be
inspected regularly.
WARNING:
Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit.
HOW TO LUBRICATE:
1. Raise the belt up on one side and apply lubricant to the running deck. Use a rag to thoroughly wipe the
lubricant over the running deck. Repeat this process for the other side.
2. The moving parts should turn freely and quietly. Abnormality of moving parts will affect the safety of
the equipment. Inspect and tighten bolts regularly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done
on a regular basis.
We recommend lubrication of the deck according to the following timetable:
• Light use (less than 3 hours per week) every 6 months.
• Medium use (3-5 hours a week) every 3 months.
• Heavy use (more than 5 hours per week) every 6-8 weeks.
Running
Belt
Board
MAINTENANCE INSTRUCTIONS | 21