In the United States and Canada you can also call (877) 654-3837 and choose option 4. Neither LifeSpan Fitness nor its representatives can accept responsibility for any damages or injury incurred as a result of information presented in this manual except under the terms...
In order to insure our product warranty and to ensure the safe and efficient operation of your LifeSpan product, only authorized parts can be used. The warranty is void if any parts other than those provided by LifeSpan are used. Exclusions and Limitations: •...
DT5 Desk: DT5 Desk: Assembly Instructions Assembly Instructions At LifeSpan we strive to make our equipment easy to assemble and start using. Parts that can be pre-assembled are always assembled and tested on Boxed Separately the product line. Prior to starting the assembly process, take all the parts out of the box, remove plastic bags and lay everything out on the floor to become familiar with the components.
Page 6
DT5 Desk: DT5 Desk: Assembly Instructions Assembly Instructions Step 1: Lift Frame Assembly Step 3: Attach U-Frame to Underside of Desk A. Position the Lift Frame (1), Left Base Foot (3) and Right Base Foot (4) as shown in "RRR"...
Page 7
DT5 Desk: DT5 Desk: Assembly Instructions Assembly Instructions Step 4: Desktop Assembly Step 5: Console Assembly A. Make sure the Extension Tube (B) is at level 15 (done in step 2C). A. Using the 5mm Allen Wrench with Screwdriver (20) take out the two pre-...
DT5 Desk: Assembly Instructions DT5 Desk: Desk Leveling and Height Adjustment Step 6: Connecting the Wires Desk Leveling A. Underneath the front of the Desktop(2) connect the two 7-pin wire The desk needs to be leveled harnesses together for console operation.
DT7 Desk: DT7 Desk: Assembly Instructions Assembly Instructions At LifeSpan we strive to make our equipment easy to assemble and start using. Parts that can be pre-assembled are always assembled and tested on the product line. Boxed Separately Prior to starting the assembly process, take all the parts out of the box, remove plastic bags and lay everything out on the floor to become familiar with the components.
Page 10
DT7 Desk: Assembly Instructions DT7 Desk: Assembly Instructions Step 3: Attach U-Frame to Underside of Desk Step 1: Lift Frame Assembly Access Panel A. Position the Lift Frame (1), Left Base Foot (3) and Right Base Foot (4) as shown in "RRR"...
Page 11
DT7 Desk: Assembly Instructions DT7 Desk: Assembly Instructions Step 4: Desktop Assembly Step 5: Console Assembly A. Using the 5mm Allen Wrench with Screwdriver (20) take out the two pre- NOTE: It is a good idea to use two people for this portion of the installed screws from the back and two screws from the bottom of each assembly in order to be sure wires are properly routed and do not console end cap so you can remove the end caps.
DT7 Desk: Assembly Instructions DT7 Desk: Desk Leveling and Height Adjustment Step 6: Connecting the Wires Step 7: Height Adjustment/Console Harness Connections A. Remove the two Upper A. Underneath the front of the Desktop(2) connect the two 7-pin and the Screws (13) attaching two 5-pin wire harnesses together for console and height adjustment the Access Panel for...
Page 13
DT7 Electric Treadmill Desk: Assembly Instructions Desk Leveling and Height Adjustment Desk Leveling Treadmill to DT5 Desk Assembly The desk needs to be leveled A. Position the pre-assembled treadmill as shown below. prior to use. The desk comes Lift the rear of the treadmill and roll it forward under the desk until the...
DT7 Electric Treadmill Desk: Assembly Instructions Treadmill to DT7 Desk Assembly A. Position the pre-assembled treadmill as shown below. Treadmill Desk Lift the rear of the treadmill and roll it forward under the desk until the Treadmill Positioning Bumper (D) located on the treadmill are centered Operations over the Desktop Positioning Bumper (A) at the base of the uprights.
Treadmill Desk Specifications Treadmill Desk Setting The Clock To accurately track your activity with apps or other computer systems, the console’s COMPARE CONSOLES clock must be set. Time, Steps, Calories, Time, Steps, Calories, Readouts Follow these steps: Distance, Speed Distance, Speed White LED White LED Display...
Bluetooth: Turns on Bluetooth communications. Phone apps available from LifeSpan can use this system to track your activity. See the Bluetooth section for more details. You can change the function of this key in Settings.
Bluetooth Operation • Resume Speed: after pressing pause and returning to the treadmill To sync your activity data with your LifeSpan app, press the Bluetooth key, go desk the default belt speed will be .4 MPH (.6 KPH) which is the to the Sync screen on the app, and hold your phone a couple of inches from normal starting speed.
Page 18
Solution: The silicone lubricant that is applied to the deck and belt is wearing Solution: Check to make sure the base feet are on a level surface. For a DT5, down and the belt needs to be lubricated with 100% silicone spray (non- make sure each extension tube is raised to the same height number as shown aerosol).
Display Details Treadmill Desk Personal Settings Press and hold Change Display for one second to enter Settings mode. Setting Choice 1 Setting Choice 2 Press the up or down arrows to move through the various settings. Press Start Displayed (Default) to choose a setting to change.
Bike Desk Specifications Bike Desk Setting The Clock To accurately track your activity with apps or other computer systems, the console’s COMPARE CONSOLES clock must be set. Time, Revolutions, Calories, Time, Revolutions, Calories, Readouts Follow these steps: Distance, Speed Distance, Speed Display Press and hold Speed Up and Speed Down for one second.
Bluetooth 4.0 or later, also known as Bluetooth Low Energy. All iPhones and most Android phones have this. To sync your activity data with your LifeSpan app, press the Bluetooth key, go to the Sync screen on the app, and hold your phone a couple of inches from...
Page 23
Problem: The desktop surface is not level. Solution: Check to make sure the base feet are on a level surface. For a DT5, make sure each extension tube is raised to the same height number as shown on the extension tube.
Page 24
Display Details Setting Choice 1 Setting Choice 2 Displayed (Default) Enter Settings SETTG mode: Beep: BEEP Pre Set: RESIS Preset Resistance: +/-1 (for Bike only) User Weight: 150/70 +/-1 Units of measure: UNITS ENGL (M)TRIC Multi-User: USER Bluetooth-Auto: BT-A...
Page 25
DT5/DT7 Treadmill/Bike Desk LifeSpan Fitness P.O. Box 981316 Park City, Utah 84098-1316 Phone: 877.654.3837 www.LifeSpanFitness.com Version 6.0...
Page 26
Treadmill Base Owner’s Manual TR800B, TR1200B, TR5000B...
Page 27
Please thoroughly read this manual before you assemble or operate your treadmill. Neither LifeSpan nor its representatives can accept responsibility for any damages or injury incurred as a result of information presented in this manual except under the terms of the product warranty.
Page 28
Contents Welcome Safety First Safety Tips About Your Treadmill Base Specifications Unique Features Warranty / Registration Grounding Maintenance and Tips Cleaning and Lubrication Moving the Treadmill Belt Tensioning Belt Adjustment...
• Use this product for its intended use as described in this Owner’s Manual. Do not use attachments that are not recommended by LifeSpan. • Do not leave your treadmill running while not in use. Children and Pets •...
About Your Treadmill Base Specifications Unique Features TR800B As a leader in the active workstations, LifeSpan has developed a number of unique features in our treadmills making them more engaging, safer and Speed Range 0.4 - 4.0 mph (0.6 - 6.4 kph) easier to use.
Page 31
In order to insure our product warranty and to ensure the safe and efficient operation of your LifeSpan product, only authorized parts can be used. The warranty is void if any parts other than those provided by LifeSpan are used. Exclusions and Limitations: •...
One ounce of silicone should be used for remove all dirt and salt from the belt, painted parts and the display. each application. LifeSpan offers 100% silicone lubricant that can be ordered at www.LifeSpanFitness.com. Monthly Cleaning The walking belt comes pre-lubricated from the factory.
Maintenance and Tips Maintenance and Tips Belt Alignment (continued) Belt Tensioning If the belt begins to slip and needs to be tensioned, tension bolts are accessible from the back of the treadmill. Before tensioning the belt, start the treadmill and set the speed to 3 mph (5 kph). A.
Page 34
TR800B/TR1200B/TR5000B Treadmill Base LifeSpan Fitness P.O. Box 981316 Park City, Utah 84098-1316 Phone: 877.654.3837 www.LifeSpanFitness.com Version 1.2...
Need help?
Do you have a question about the DT5 and is the answer not in the manual?
Questions and answers