Table of Contents
Advertisement
8
A
B
STEP 7
1. First, identify the connecting wires in the
panel assembly (8). As depicted in the left
view, connect the male and female plugs
accordingly. Place the wires into the electronic
watch, and then insert the panel assembly (8)
into the electronic watch assembly.
8
STEP 8
1. Use a 6# socket wrench (14) to secure the
socket cylinder head screw (66) through the
panel assembly (8) and gently tighten it on
the electronic watch.
66
32
STEP 9
1. Secure the right base shield (31) onto the
base and the right upright post using a cross
wrench (12) and a cross slotted pan head self-
tapping and self-drilling screw (75).
2. Repeat the same procedure on both the left
and right sides.
31
75
ASSEMBLY INSTRUCTIONS |
11
Advertisement
Table of Contents
