Table of Contents
Advertisement
Network Printing with Tektronix Color Printers
The printer's Configuration Page
The information supplied on the Configuration Page is helpful when you are installing
and configuring the printer on a network. There are two ways to print the Configuration
Page:
I
Use the printer's front panel. Use this method if your printer is not yet configured on
the network. Refer to Printing a Configuration Page from the Phaser 750 front panel
on page 2.
I
Use PhaserLink Printer Management Software. With a TCP/IP connection and a
World Wide Web browser, you can use PhaserLink Printer Management Software; see
Printing a Configuration Page: PhaserLink Printer Management Software on page 2.
Printing a Configuration Page from the Phaser 750 front panel
1.
When the front panel displays
2.
Press the right-arrow ( ----> ) button until Configuration is displayed. Press the Menu
button.
3.
Press the Print button.
4.
To return the printer to normal operation, press the Exit button (the left-most button)
until the front panel displays Ready.
Printing a Configuration Page: PhaserLink Printer Management
Software
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
On the left side of any PhaserLink page, click Settings.
3.
In the REPORTS group, click Print Configuration Page.
For more information on PhaserLink Printer Management Software, see PhaserLink Printer
Management Software on page 33.
The printer's networking software
The printer's software CD-ROM contains software for installing your printer on a network.
The CD-ROM also contains online documentation, printer drivers, and other printer
software. A single integrated installer is used to install printer drivers and other software.
For information on running the installer, see Using the Tektronix Installer on page 5.
2
press the Menu button.
Ready,
Phaser 750 Color Printer
Advertisement
Table of Contents
Troubleshooting
