Setting Up Usage Profile Reporting - Tektronix Phaser 750DP Install Manual

For more information on PhaserLink Printer Management Software, see PhaserLink Printer
Management Software on page 33.
Sending reports via email from the Phaser 750 front panel
Note
To send Usage Profile reports via email, the printer must be properly set up via
PhaserLink Printer Management Software. For more information, see Setting up
Usage Profile reporting on page 39.
1.
When the front panel displays Ready, press the Help button.
2.
Press the right-arrow (---->) button until Printer Administration is displayed. Press
the Menu button.
3.
Press the right-arrow (---->) button until Usage Profile is displayed. Press the Menu
button.
4. Press the right-arrow (---->) button until Email Report (for full reports) or Email Job
Report is displayed. Press the Email button.
5.
To return the printer to normal operation, press the Exit button (the left-most button)
until the front panel displays Ready.
Sending reports via email: PhaserLink Printer Management
Software
Note
To send Usage Profile reports via email, the printer must be properly set up via
PhaserLink Printer Management Software. For more information, see the next
topic Setting up Usage Profile reporting.
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
On the left side of any PhaserLink page, click Settings.
3.
In the REPORTS group, click Usage Profile Reports.
4. Click the link to email the desired type of report.
For more information on PhaserLink Printer Management Software, see PhaserLink Printer
Management Software on page 33.

Setting up Usage Profile reporting

1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
On the left side of the page, click Settings.
3.
In the SETUP group, click Usage Profile Setup.
4.
Follow the instructions on the page for setting up reports.
5.
Click Apply to save your changes.
Networking Setup Guide
Printer Management
39