Installation On Workstations For Client-Server Printing - Tektronix Phaser 750DP Install Manual

Installation on workstations for client-server printing

Use this procedure to install the printer on workstations when print jobs are to be sent
through a print server to the printer.
1.
Run the installer as described in Tektronix Installer for Windows on page 5.
2.
When prompted, select Easy Install, Minimal Install, or Custom Install. Continue
following the on-screen instructions.
3.
The installer searches for the printer:
If the installer finds the printer (printer device, or physical printer), you must
I
identify the print server queue, so select Choose a different printer. This
advances the installer to the next screen, where you can identify the print server
queue.
If the installer does not find the printer (printer device, or physical printer),
I
select Choose the printer myself. This advances the installer to the next screen,
where you can identify the print server queue.
4.
When prompted: How your printer connected? Select Shared by a network server
(client/server).
5.
When prompted: Select a printer to set up, browse the displayed Network
Neighborhood tree and select the print server queue.
6.
Follow the remaining on-screen instructions to complete the installation.
Networking Setup Guide
Windows NT
19