Network Printing with Tektronix Color Printers
The printer's Configuration Page
The information supplied on the Configuration Page is helpful when you are installing
and configuring the printer on a network. There are two ways to print the Configuration
Page:
Use the printer's front panel. Use this method if your printer is not yet configured on
the network. Refer to Printing a Configuration Page from the Phaser 850 front panel
on page 2.
Use PhaserLink Printer Management Software. With a TCP/IP connection and a
World Wide Web browser, you can use PhaserLink Printer Management Software; see
Printing a Configuration Page: PhaserLink Printer Management Software on page 2.
Printing a Configuration Page from the Phaser 850 front panel
1.
When the front panel displays READY TO PRINT, press the up-arrow button until
Menu is highlighted. Press Select.
2.
Press the down-arrow button until Printer Configuration is highlighted. Press Select.
3.
Press the down-arrow button until Print Configuration Page is highlighted. Press
Select.
4.
To return the printer to normal operation, press the down-arrow button until Exit is
highlighted. Press Select.
Printing a Configuration Page: PhaserLink Printer Management
Software
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
On the left side of any PhaserLink page, click Settings.
3.
In the REPORTS group, click Print Configuration Page.
The printer's networking software
The printer's software CD-ROM contains software for installing your printer on a network.
The CD-ROM also contains online documentation, printer drivers, and other printer
software. A single integrated installer is used to install printer drivers and other software.
For information on running the installer, see Using the Tektronix Installer on page 5.
2
Phaser 850 Color Printer