Disabling Protocols: Phaserlink Printer Management Software - Tektronix Phaser 750DP Install Manual

Disabling and Enabling Protocols
Disabling protocols: PhaserLink Printer
Management Software
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2. On the left side of any PhaserLink page, click Settings.
3. In the INTERFACES group, click the link for the protocol you want to disable; this
displays the page for that protocol.
4.
At the top of the page is a field labeled with the name of the protocol; to disable the
protocol, select Disabled, then click Apply at the bottom of the page.
For more information on PhaserLink Printer Management Software, see PhaserLink Printer
Management Software on page 33.
44
Phaser 750 Color Printer