Using The Tektronix Installer; Tektronix Installer For Windows - Tektronix Phaser 750DP Install Manual

Using the Tektronix Installer

Tektronix Installer for Windows

The Tektronix installer for Windows is on your printer's software CD-ROM. A single
integrated installer is used to install printer drivers and other software.
The Tektronix installer automatically performs printer installation tasks and creates a
printer. In most cases, you are required only to make a few installation choices, clicking
Next to move from screen to screen.
Each installer screen provides text that describes the choices for that screen. If you are
unsure about which choice to make, click the name of the item to highlight it, then read
the explanation in the Description field. To make your choices, check the boxes for the
desired items and click Next to continue.
Running the installer from the printer's CD-ROM
1.
Insert the printer's software CD-ROM into the CD-ROM drive.
If the Windows autorun feature is enabled, the CD-ROM launches automatically.
I
If the Windows autorun feature is disabled, double-click My Computer, then
I
double click the CD icon to launch the CD-ROM.
2.
Click Install Printer Driver.
3.
Follow the on-screen instructions to complete the installation.
Running the installer from the printer's hard disk
You can run the installer from the printer's optional hard disk, if one is installed. This
method requires that you already have a TCP/IP connection to the printer.
1.
Connect to your printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
Scroll to the bottom of the PhaserLink Status page. In the LINKS group, click Install
Drivers.
Networking Setup Guide
Using the Tektronix Installer
5