Tcp/Ip Configuration Overview - Tektronix Phaser 750DP Install Manual

Phasershare networking

Hide thumbs Also See for Phaser 750DP:

Table of Contents

TCP/IP Configuration Overview

Setting the printer's IP address

The Tektronix Installer for Windows automatically sets the printer's IP address under the

following conditions:

The printer has a network connection.

TCP/IP is installed on the computer.

The IP address has not already been assigned (for example, from the front panel or by

DHCP).

During the installation process, you can accept the automatically assigned address or

assign a different one.

The Tektronix installer for Windows is the recommended method for setting IP address in

Windows environments; for other environments, see Setting the Printer's IP Address on

page 22.

Host (computer) configuration

Refer to the topic for your environment:

Windows 95 and Windows 98: PhaserPort Software on page 15.

Windows NT on page 18.

TCP/IP for Macintosh on page 20.

For TCP/IP Unix Host configuration, see the

For TCP/IP configuration for OS/2 Warp and LAN Server, see the

Networking Manual.

Printing the Configuration Page

Your printer's Configuration Page reports important information that you will need for

TCP/IP configuration. For information on printing a Configuration Page, see The printer's

Configuration Page on page 2.

PhaserShare Networking Manual.

PhaserShare

Phaser 750 Color Printer

Table of Contents