Adding A Port To An Existing Printer - Tektronix Phaser 750DP Install Manual

Windows 95 and Windows 98: PhaserPort Software
Installation on workstations for peer-to-peer printing
1.
Run the installer as described in Tektronix Installer for Windows on page 5.
2.
When prompted, select Easy Install, Minimal Install, or Custom Install. Continue
following the on-screen instructions.
3.
The installer attempts to find your printer on the network; if it cannot find the
printer, a dialog is displayed prompting you for more information. The on-screen
descriptions provide more information.
4.
Follow the remaining on-screen instructions to complete the installation.
Installation on workstations for client-server printing
Use this procedure to install the printer on workstations when print jobs are to be sent
through a print server to the printer.
1.
Run the installer as described in Tektronix Installer for Windows on page 5.
2.
When prompted, select Easy Install, Minimal Install, or Custom Install. Continue
following the on-screen instructions.
3.
The installer searches for the printer:
If the installer finds the printer (printer device, or physical printer), you must
I
identify the print server queue, so select Choose a different printer. This
advances the installer to the next screen, where you can identify the print server
queue.
If the installer does not find the printer (printer device, or physical printer),
I
select Choose the printer myself. This advances the installer to the next screen,
where you can identify the print server queue.
4.
When prompted: How your printer connected? Select Shared by a network server
(client/server).
5.
When prompted: Select a printer to set up, browse the displayed Network
Neighborhood tree and select the print server queue.
6.
Follow the remaining on-screen instructions to complete the installation.

Adding a port to an existing printer

Use this procedure to add a port after you have installed the printer.
1.
Select your printer:
a.
From the Start menu, select Settings, then click Printers.
b.
In the Printers window, right-mouse click on your printer.
2. From the pop-up menu, choose Properties.
3. When the properties dialog for the printer is displayed, click Details.
4.
Click Add Port, then select Other.
16
Phaser 750 Color Printer